Table of Contents
Advertisement
The Registration Procedure shall not be used to configure a system. It is
primarily a procedure to create a database of SLC devices. Owner locations are
CAUTION
not assigned during the Registration Procedure.
Step
1
Press 0 Key
2
Enter Password; Press "Enter" Key
3
Press 3 Key
4
Press 3 Key
5
Press 3 Key
6
Use keypad to select address or range of
addresses to register.
Press "Enter" Key to confirm selection.
7
Wait until "Device Registration" message
disappears from the display.
8
Exit Menu System
P/N 06-236530-001
Note: Wait for each SLC device to report a "Not-Registered" trouble
message and ensure that all these trouble messages have been
acknowledged
Procedure.
Execute the De-Registration Procedure before re-registering
any previously-registered addresses.
Action
3-45
before
proceeding
Result
Initiate menu access
Gain access to menus
Enter Set-Menu branch
Access "SLC Devices" option
Select "Registration"
Specify addresses to register
Devices register or fail.
with
the
Registration
August 2013
Advertisement
Table of Contents
