Crankshaft Oil Seal; Installation (Engine Removal Not Required) - Acura 3.5 RL Manual

Crankshaft Oil Seal

Installation
The seal surface on the block should be dry.
Apply a light coat of oil to the crankshaft and to
the lip of the oil seal.
1. Using the special tool, drive the crankshaft oil seal
into the rear cover.
DRIVER
07749-0010000
DRIVER
ATTACHMENT
07948-SB00101
2. Confirm that the clearance is equal all the way
around with a feeler gauge.
Clearance: 0.2 - 0.5 mm (0.01 - 0.02 in)
0.2 — 0.5 mm
(0.01 — 0.02 in)
REAR COVER
NOTE: Refer to pages
of the oil pump side oil seal.
REAR COVER
Install oil seal with the
part number side
facing out.
REAR
COVER
CRANKSHAFT OIL
SEAL
7-30 and 8-15 for installation