Acura 3.5 RL Manual page 185

33. Remove the TCS control valve upper and lower
brackets (see page 6-8).
34 Disconnect the TCS throttle position sensor connec-
tor and TCS throttle actuator connector, then remove
the TCS control valve assembly (see page 6-8).
35. Remove the intake manifold and water passage.
NOTE: Fill the cylinder head intake ports with clean
shop towels to prevent foreign materials from get-
ting into the cylinders.
WATER
PASSAGE
O-RING
Replace.
36. Remove the covers, then remove the left and right
exhaust manifolds (see page 9-4).
37. Remove the balancer belt and timing belt (see page
6-8).
38. Remove the three bolts securing the alternator
INTAKE
MANIFOLD
GASKETS
Replace.
39. Remove the two bolts securing the P/S pump bracket.
bracket.
ALTERNATOR
BRACKET
P/S PUMP
BRACKET
10 x 1.25 mm
44 N-m (4.5 kgf-m,
33 Ibf-ft)
6 x 1.0 mm
12 N-m (1.2 kgf-m,
8.7 Ibf-ft)
8 x 1.25 mm
22 N-m (2.2 kgf-m,
16 Ibf-ft)