Ckp/Cyp Sensor Replacement - Acura 3.5 RL Manual

CKP/CYP Sensor
Replacement
1. Turn the crankshaft so that the No. 1 piston is at top
dead center (see page 6-13).
2. Remove the breather hose and vacuum hoses (see
page 6-9).
3. Remove the vacuum hoses and ignition control
module (ICM) bracket (see page 6-9).
4. Remove the upper covers.
5. Remove the timing belt from the right and left cam-
shaft pulleys (see page 6-4).
6. Remove the left camshaft pulley.
6 x 1.0 mm
12 N-m (1.2 kgf-m, 8.7 Ibf-ft)
RIGHT
UPPER COVER
LEFT
UPPER COVER
RUBBER SEALS
Replace when damaged
or deteriorated.
LEFT BACK
COVER
6 x 1.0 mm
12 N-m (1.2 kgf-m,8.7 Ibf-ft)
7. Remove the left back cover.
8. Remove the CKP/CYP sensor from the left cylinder
head.
9. Install the CKP/CYP sensor in the reverse order of
removal.
Refer to page 6-10 when installing the timing belt.
LEFT CAMSHAFT
PULLEY
8 x 1.25 mm
31 N-m (3.2 kgf-m,
23 Ibf-ft)
RUBBER SEAL
Replace when damaged
or deteriorated.
CKP/CYP
SENSOR
6 x 1.0 mm
12 N-m (1.2 kgf-m,
8.7 Ibf-ft)