Camshaft; Inspection - Acura 3.5 RL Manual

Camshaft

Inspection

NOTE:
• Do not rotate the camshaft during inspection.
• Remove the rocker arms and rocker shafts.
1. Put the camshaft and the camshaft holders on the
cylinder head, then tighten the bolts to the specified
torque.
Specified torque:
8 mm bolts: 22 N-m (2.2 kgf-m, 16 Ibf-ft)
6 mm bolts: 12 N-m (1.2 kgf-m, 8.7 Ibf-ft)
8 mm bolts:
2. Seat the camshaft by pushing it toward the rear of
the cylinder head.
3. Zero the dial indicator against the rear of the cam-
shaft. Push the camshaft back and forth, and read
the end play.
Camshaft End Play:
Standard (New): 0.05 - 0.15 mm
(0.002 - 0.006 in)
Service Limit: 0.15 mm (0.006 in)
CAMSHAFT