22. Disconnect the spark plug voltage detection module
connector, and remove the engine ground cables.
6 x 1.0 mm
12 N-m (1.2 kgf-m,
8.7 Ibf-ft)
SPARK PLUG VOLTAGE
DETECTION MODULE
CONNECTOR
23. Remove the vacuum hoses.
GROUND
CABLES
VACUUM
HOSES
24. Loosen the mounting bolt, lock bolt and adjusting
rod, then remove the alternator belt.
ADJUSTING
ROD
ALTERNATOR
BELT
Loosen the idler pulley center nut and adjusting
25.
bolt, then remove the air conditioning (A/C) com-
pressor belt.
ADJUSTING
BOLT
A/C COMPRESSOR
BELT
LOCK BOLT
8 x 1.25 mm
22 N-m (2.2 kgf-m,
16 Ibf-ft)
MOUNTING BOLT
10 x 1.25 mm
44 N-m (4.5 kgf-m,
33 Ibf-ft)
IDLER PULLEY
CENTER NUT
10 x 1.25 mm
44 N-m (4.5 kgf-m,
33 Ibf-ft)