Engine Removal/Installation
Removal (cont'd)
18. Remove the evaporative emission (EVAP) canister
hose and brake booster vacuum hose.
EVAP CONTROL
CANISTER HOSE
19. Disconnect the transmission sub-harness connec-
tor, and remove the wire harness clamp.
WIRE HARNESS
CLAMP
BRAKE BOOSTER
VACUUM HOSE
TRANSMISSION
SUB-HARNESS
CONNECTOR
20. Disconnect the connector, then remove the control
box.
6 x 1.0 mm
12 N-m (1.2 kgf-m,
8.7 Ibf-ft)
CONNECTOR
21. Disconnect the engine wire harness connectors on
the right side of the engine compartment.
ENGINE WIRE
HARNESS CONNECTOR
CONTROL
BOX