Camshafts/Rocker Arms And Camshaft Seals - Acura 3.5 RL Manual

Camshafts/Rocker Arms and
Camshaft Seals
CAUTION:
• Make sure that all rockers are in alignment with their
valves when torquing the rocker assembly bolts.
• To prevent the rocker arm assembly from coming
apart, leave the camshaft holder bolts in the holes.
• Handle the rocker arms carefully so that the oil does
not come out of the hydraulic tappets.
1. Install the camshaft and rubber cap, then install the
camshaft seal with the open side (spring) facing in.
NOTE:
• Position the camshaft with pin hole at the top.
• Do not apply oil to the camshaft holder mating
surface of the camshaft seal.
• Apply liquid gasket. Part No. 08718 - 0001 or
08718 - 0003 around the rubber cap.
CAMSHAFT
RUBBER CAP
Replace if there was
oil leakage.
OIL SEAL
Replace.
Seal housing surface should be dry.
Apply a light coat of oil to camshaft
and inner lip of seal.