Crankshaft Pulley and Pulley Bolt
Replacement
When installing and tightening the pulley, follow the procedure below.
Clean, remove any oil, and lubricate the points shown below.
Clean
Remove any oil
Lubricate
WASHER
PULLEY BOLT
Crankshaft pulley bolt size and torque value:
16 x 1.5 mm
245 N-m (25.0 kgf-m, 181 Ibf-ft)
NOTE: Do not use an impact wrench when installing.
CRANKSHAFT
PULLEY
BALANCER
BELT DRIVE PULLEY
HOLDER HANDLE
07JAB-001020A
TIMING BELT
DRIVE PULLEY
TIMING BELT
GUIDE PLATE
HOLDER ATTACHMENT,
50 mm, OFFSET
07MAB-PY3010A
SOCKET, 19 mm
07JAA-001020A
(Commercially available)
CRANKSHAFT