Driving Position Memory System - Acura MDX 2022 Owner's Manual

Driving Position Memory System

You can store three driver's seat, front passenger's seat
mirror *1 positions with the driving position memory system.
When you unlock and open the driver's door with a remote transmitter, or keyless
access system, door mirrors adjust to one of the three preset positions
adjusts to retracted positions of one of the three preset positions automatically.
The steering wheel and the seat will move to the stored position when you set the
power mode to ACCESSORY *1
When you enter the vehicle, the display briefly shows you which remote transmitter
you used to unlock the vehicle.
• DRIVER 1 transmitter is linked to memory button 1.
• DRIVER 2 transmitter is linked to memory button 2.
DRIVER 1 DRIVER 2
*1: Driver's seat only
* Not available on all models
uuOperating the Switches Around the Steering WheeluDriving Position Memory System
* , steering wheel
.
The driver's seat moves rearward and steering
wheel fully up depending on the set seating
position once you
• Stop the vehicle.
• Put the transmission in
• Turn the engine off.
• Then open the driver's door.
Once the power mode is in the ACCESSORY
position, the driver's seat and steering wheel
moves to the DRIVER 1 or 2 preset position.
*1 and door
1Driving Position Memory System
Using the audio/information screen, you can disable
the automatic seat, steering wheel and door mirrors
adjustment function.
*1 and the seat
2 Customized Features P. 345
The driver's seat easy exit feature can be turned ON/
OFF.
2 Customized Features P. 345
System Operation
The system will not operate if:
•
The vehicle speed is above 3 mph (5 km/h).
•
Either memory button is pressed while the seat or
steering wheel is in motion.
•
The seat or steering wheel position is adjusted
while in operation.
•
The memory 1, 2, or 3 position is set fully to the
rear.
Models with mode selector
( P .
•
The mode selector is pressed up or down while in
operation.
Continued 183