Toolbarvisible; Simatic Batch Os Properties; Communicationchannel; Ordercategoryname - Siemens SIMATIC BATCH Operating Manual

BATCH OS controls
11.5 Control properties references
13 for the attribute for the "Undock automatically" function, the button is displayed in the OS
control as pressed, that is, the OS Control is automatically shown as undocked.
Default: 1;13;;18;17;19;20;;2;3;14;;4;5;6;7;8;9;;15;16;;10;11;;12
The attribute can be dynamized with the ToolbarOrderAndVisibility name.
11.5.2.8

ToolbarVisible

Boolean variable.
This attribute specifies whether or not the toolbar is displayed in the control.
Default: Yes, the toolbar is used and displayed.
The attribute can be dynamized with the ToolbarVisible name.
11.5.3

SIMATIC BATCH OS Properties

11.5.3.1

CommunicationChannel

String.
Defines the communication channel for the selected BATCH project. Select the same
communication channel that you use in the "SIMATIC BATCH OS Master" control. This
ensures that you obtain the data for the unit allocation from the relevant BATCH project.
Default value = 1.
The attribute can be dynamized with the CommunicationChannel name.
11.5.3.2

OrderCategoryName

String.
With this attribute, you specify which batch from this order category will be displayed in the
control. Apart from the OrderCategoryName attribute, the OrderName and BatchName
attributes are also required to identify the batch.
As an alternative, you can use the BatchID attribute that should be preferred due to its
performance.
Default: None
The attribute can be dynamized with the OrderCategoryName name.
11.5.3.3

OrderName

String.
With this attribute, you specify which batch from this order will be displayed in the control. Apart
from the OrderName attribute, the BatchName and OrderCategoryName attributes are also
required to identify the batch.
650
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA