Bcc And Re Edit Menu; Cut (Edit Menu); Copy (Edit Menu) - Siemens SIMATIC BATCH Operating Manual

Context help references

14.5 BCC and RE Edit menu

14.5 BCC and RE Edit menu
14.5.1

Cut (Edit menu)

Function
In the BATCH Recipe Editor, this command is used in a recipe to delete selected objects
(structure elements) and place them on the clipboard. The objects can then be pasted at
another location. The objects remain in the clipboard until further objects are cut or copied.
Note
You can only cut if you have selected only one object or if the selected objects are adjacent
to or above each other.
Additional information
Paste (Edit menu) (Page 1107)
Copy (Edit menu) (Page 1106)
Delete (Edit menu) (Page 1098)
Undo (Edit menu) (Page 1098)
14.5.2

Copy (Edit menu)

Function
In the BATCH Recipe Editor, this command is used in a recipe to copy selected objects
(structure elements) and place them on the clipboard. The objects can then be pasted at
another location. The objects remain in the clipboard until further objects are cut or copied.
Note
You can copy if you have selected only one object or if the selected objects are adjacent to or
above each other.
Note
When copying from transitions into another recipe operation (ROP), references in this ROP to
non-existent parameters are cancelled and have to be re-parameterized.
Additional information
Cut (Edit menu) (Page 1106)
1106
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA