Siemens SIMATIC BATCH Operating Manual page 1019

Created by
"Parameters" button
Dynamic equipment property
Buttons
Check validity
Update
Delete
Log
"Errors" display field
"Warnings" display field
"Display" button
Additional functions
Displays: All units that have this equipment property are listed in a dialog box. Certain attributes
can be selected by means of a special filter.
OK button
Saves your settings and closes the dialog.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Specification of the application that created the object, either SIMATIC
BATCH PCell Control Center or SIMATIC Manager:
● If a type object was created by SIMATIC Manager, additional subobjects
cannot be added, nor can the selected object be deleted or changed,
either via the PCC API or with the PCC configuration dialog.
● If an instance object was created by SIMATIC Manager, additional
subobjects can be added via the PCC API or with the PCC configuration
dialog. However, it is still not possible to delete or change the selected
object here.
Clicking this button takes you to the corresponding parameter of the data
type concerned. With the Back button on the data type, you return to this
location.
All batch instances, starting with the selected object, are checked for con‐
sistency with batch types and for conformity to ISA-88. The validity errors
and warnings are displayed in the log field. Use the "Display" button to
visualize the messages.
All batch instances are adapted according to the batch types. This action
is always required if a change has been made to batch types of existing
batch instances (e.g., inserting a new parameter, changing the unit of
measure, etc.).
The equipment property object can be deleted here. Deletion is only pos‐
sible if the selected object is not in use.
The number of errors for the selected log is displayed.
The number of warnings for the selected log is displayed.
The logging is activated with the "Display" button. The selected log is
generated as an XML file in the specified layout and displayed in In‐
ternet Explorer.
Select "Process cell" and click the "Display" button to show all process
cell errors or warnings. You can also right-click a selected object and
select the "Display log" function to display object-specific errors or
warnings.
Context help references
14.1 Dialogs
1019