Siemens SIMATIC BATCH Operating Manual page 530

BATCH Recipe Editor
10.4 Creating recipes
"Operator Selection" strategy
If the "Operator selection" strategy is configured, a status symbol is set at the recipe step
(visible in the open control recipe) as soon as SIMATIC BATCH wants to use a unit.
Image 10-6
Image 10-7
After selecting the recipe unit procedure (with a hierarchical recipe) or the recipe phase (with
a flat recipe) with the status symbol, you can select the required unit with the "Select unit"
shortcut menu command.
530
Strategy operator selection of the unit
Allocation of the unit by operator selection
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA