Import - Assign Objects - Siemens SIMATIC BATCH Operating Manual

dialog cannot be exited with the "Next" button. In this case, specify a new recipe name or
exclude the recipe from the import by removing the check mark. Then press "Next".
Recipe/Library/Formula Category
This column contains the objects to be imported, e.g., basic recipes. The check box indicates
whether or not the element is to be imported.
Status displays:
Symbol
New name
A new name for the object to be imported can be specified here. Only this name then appears
following the import. If the name is already in use in the target process cell and you do not
wish to use the object in the target process cell, you should rename the object at this point.
Otherwise, you cannot continue the import process.
Select the element to be imported and click "Rename" in the shortcut menu to change the
name. A dialog then opens for entering the required change.
Note
Information regarding the status of the object is specified here.
Next
Goes to the next page. If the data on the current page are incomplete, a warning appears and
the element creating the problem is marked on the list.
14.2.7.2

Import - Assign Objects

Introduction
In this dialog, you make the assignment between the recipe elements: libraries, formula
categories, materials or roles
● The process cell data of the import file are listed on the left.
● The process cell data of the open Batch process cell (target process cell) is listed on the
right.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Meaning
There is a conflict that must be resolved.
Data are imported under a new name.
Data are replaced by data from the target process cell.
Data are imported unchanged.
Data have been deselected for the import.
Context help references
14.2 BCC menu commands
1083