Tooltips And Shortcut Menu Of The Import Wizard - Siemens SIMATIC BATCH Operating Manual

BATCH Control Center
9.5 Recipes
4. Following the instructions provided by the interactive dialog. Once you have completed the
settings for a dialog, click the "Next" button. Detailed information about the particular dialog
box is available in the online help (click the "Help" button).
Result: The entries are always checked for discrepancies before a dialog is closed. The
system checks if all elements with a check mark have an assignment. If they do not, correct
the error and press "Next" again.
Example for the import of recipes: If there is a saved recipe with the same name and same
version in the currently open Batch process cell, this is indicated by a red exclamation mark
in the recipe line and you cannot leave the "Import Recipes" dialog and proceed to the next
dialog with the "Next" button. In this case, specify a new recipe name or a new version
number or exclude the recipe from the import by removing the check mar. Then click "Next".
5. Once you have completed all dialog boxes, click the "Finish" button.
Result: All selected elements are imported and displayed in the tree.
Note
All referenced objects (such as material, libraries, formula categories) are imported
according to your settings.
All formulas in a formula category are always included in the import.
9.5.8.4

Tooltips and shortcut menu of the import wizard

Tooltips in the dialog boxes of the wizard
Tooltips are shown when you hold the mouse pointer over the list elements: Tooltips contain
information such as name, object ID and/or unit.
Shortcut menu in the dialog boxes of the wizard
A shortcut menu can be opened for dialog boxes with assignment lists by right-clicking in the
dialog box. Depending on the status of the list lines, the following commands are available in
the shortcut menus:
Shortcut menu command Description
Import
Exclude from import
Rename
324
The check box is selected with this command.
If the check box for the list row is not selected, this command is the only one
in the shortcut menu.
This command is only in the shortcut menu if the check box for the list row
is selected.
This command clears the check box and removes any assignment or re‐
naming that you have made.
This command is only in the shortcut menu if the check box is selected and
renaming is permitted.
Using this command, you can give the element a new name under which
the element will be imported.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA