Siemens SIMATIC BATCH Operating Manual page 606

BATCH OS controls
11.3 Operations in process mode
Information in the control
The allocation data of the unit is listed in tabular form in the Control. Each line of the table
contains a unit. For each unit, information is shown or read from the linked BATCH project in
table columns and updated. A unit in use by a batch in progress is visualized with the
corresponding status symbol in the "Batch" table column and is superimposed over any
previous batch information. Only the major status symbols of the batch are listed for the "Batch"
column.
Table column
Unit
Batch
606
Description
Unit name with symbol
Status symbols of the batch,
name of the batch.
Symbol Meaning
Unit enabled for BATCH and
free for new batches
Unit enable for BATCH re‐
voked
Unit enabled for BATCH and
currently allocated to batch
Unit is registered for mainte‐
nance
Unit allocated and enable for
BATCH revoked
No information about status of
unit available, for example, AS
cannot be reached or is in
STOP.
Batch running on unit
Batch paused after step and
recipe element requires oper‐
ation.
Operating Manual, 02/2016, A5E35958174-AA
SIMATIC BATCH V8.2