Hierarchical Recipes; Hierarchical Recipes With Rops - Siemens SIMATIC BATCH Operating Manual

BATCH Recipe Editor
10.3 Recipe topology
10.3.2

Hierarchical recipes

10.3.2.1 Hierarchical recipes
Hierarchical recipes
With the BATCH Recipe Editor, you create hierarchical recipes. The following recipes are
possible:
● Hierarchical recipes with ROPs (Page 502)
● Hierarchical recipes with RPHs (Page 503)
● Hierarchical recipes with ROPs and RPHs (Page 504)
10.3.2.2

Hierarchical recipes with ROPs

Configuration
The following figure shows the basic structure of a hierarchical recipe with ROPs. Below the
recipe unit procedure (RUP), there may be several recipe operations (ROPs). The recipe
operations use the EOP blocks directly. These EOPs are created during engineering of the
basic control (refer to the section on configuration in the ES).
Editing parallel recipe operations (ROPs)
You can only edit parallel branches in hierarchical recipes if you activate the "Allow parallel
ROPs" option in the BATCH control center under Options > Settings > Project settings >
"General" tab.
502
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA