Station" Selection - Siemens SIMATIC BATCH Operating Manual

14.1.12.6

"Station" selection

In the "Process cell data" list you have selected the "Station" object.
Runtime name in the dialog header
Logical path within the navigation tree.
Process cell data
For navigation in the process cell data.
Properties
Name of the object selected in the process cell tree. Information about the station is displayed
in the "Description" text field. If you entered a comment for the object in the properties in the
basic engineering, this is displayed here.
Simulation (TCP/IP) on / off: Caution, select the check box only for test mode on a single-station
system with the simulation software, S7-PLCSIM. Please note that additional configuration
steps must be carried out for simulation. You can find detailed instructions here (Page 687).
If you select the option, you then have to update the station data and load it onto the BATCH
servers. A new communication link is created only when you update the process cell in
BatchCC.
You must disable the option for production or normal operation.
Station
Button
Update
Compile / Down‐
load
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Function
The basic data of the BATCH process cell is generated or updated.. For AS-based
operation, the configuration from basic engineering is adapted as follows:
● The necessary CFC charts are created or updated for AS-based operation.
Example: @ASB_Mem.
● The BATCH application or standby BATCH application in your SIMATIC PC
station is / are replaced.
● Missing S7 connections between the Batch application and the AS are
created.
Note
S7 connections are created for H-CPUs. You have to configure fault-tolerant
connections in Netpro yourself. They are then used by SIMATIC BATCH.
Opens the "Compile / Download" dialog. The dialog consists of various tabs in
which you compile/download blocks (data and memory blocks), charts or pro‐
grams.
Context help references
14.1 Dialogs
865