Siemens SIMATIC BATCH Operating Manual page 369

and highest amount are shown as a tooltip. For linear adjustment, these values are calculated
as follows:
● Adjusted parameter of lower limit = (1000 / 100) * 0 = 0
● Adjusted parameter of upper limit = (1000 / 5000) * 1500 = 300
Image 9-10 Fig 2: Display of the nominal limits of several candidates without preferred unit
If UNIT_B has been indicated as the preferred unit, then the values from the corresponding
function/operation (here, lower limit = 0 and upper limit = 100) are displayed as the lower/upper
limit in black. (see Fig 3). The tooltip limits are then as follows:
● Adjusted parameter of lower limit = (1000 / 100) * 0 = 0
● Adjusted parameter of upper limit = (1000 / 5000) * 100 = 20
Image 9-11 Fig 3: Display of nominal limits in candidate mode with preferred unit "UNIT_B"
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
BATCH Control Center
9.6 Batch Planning
369