Recipe Phase/Operation (Insert Menu) - Siemens SIMATIC BATCH Operating Manual

Properties
The properties of the step elements and the underlying step sequence are identical. The data
in the "General", "Input material", "Output material", "Parameters" (process parameters) and
"Process tags" tabs can be edited.
● Hierarchical recipe:
The unit class and, if selected, a preferred unit for creating a batch are specified by inserting
them in the corresponding unit column.
● Flat recipe:
The unit class/unit can be assigned individually (and differently) for each recipe step on the
"General" tab.
Exiting the insertion function
The insertion function for the object is exited by clicking the selection arrow or a different
insertion object (menu or toolbar) or with ESC.
10.4.5.2

Recipe phase/operation (Insert menu)

Overview
This function inserts recipe steps of the recipe phase type (RPH). In the properties dialog in
the sequence window for the recipe unit procedure, you can link a step with a recipe phase of
the type EOP or EPH. In the sequence window for the recipe operation or a single level recipe,
you can link a step with a recipe phase of the type EPH.
Properties
Through insertion in the appropriate unit column of a hierarchical recipe, the unit class, (and
if preselected) a unit that is preferred for creating a batch is/are specified. The data in the
"General", "Input material", "Output material", "Parameters" (process parameters) and
"Process tags" tabs can be edited.
To link the recipe steps with the data of the basic control, the configuration data of the
corresponding process cell must be read in or updated with the BATCH object manager.
End the insert function
The insert function is closed for this object by clicking the selection arrow or a different object
to be inserted (menu or toolbar) or with ESC.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
BATCH Recipe Editor
10.4 Creating recipes
533