Siemens SIMATIC BATCH Operating Manual page 323

cell). The status of the assignments is display graphically. Missing assignments can be
manually removed by selecting check boxes. Assignments can only be made when the name
and data type match.
If an assignment cannot be made or if an element is to be excluded, leave the relevant check
box empty.
Note
If you deactivate the import of individual elements, the validation is no longer guaranteed. The
resulting errors in the validation check are shown in the validation log. You can correct these
errors in the Recipe Editor of the affected recipe.
Additional parameter assignments must be made for formula categories and libraries. If a
formula category is replaced, for example, the import wizard must be informed which parameter
from the new formula category corresponds to which parameter from the old formula category.
This is especially important to provide the interconnected parameters in the recipe header a
reference in the new formula category. The import wizard preassigns the parameters where
possible. You will also need to check and, where necessary, correct these assignments.
Parameters can only be assigned when the target data type and unit of measure of the original
parameter match the data type and unit of measure of the assigned parameter.
Proceed as follows:
1. Select the menu command Options > Import in BatchCC.
Result: The "Import objects from file" dialog opens.
2. Select the file to be imported. After selecting a file with the "*.sbx" extension, the right table
"Elements contained in export file" is filled out. The type (master recipes, libraries, formula
categories) and number of objects of the type are displayed on a line depending on the
content of the sbx file. Select the type you want to import here.
3. Confirm your selection of the desired file with "OK".
Result: The import wizard starts.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
BATCH Control Center
9.5 Recipes
323