Product" Tab (Recipe Procedure Properties) - Siemens SIMATIC BATCH Operating Manual

Process cell reference: Shows all parameters of the equipment phases within the recipe unit
procedures of the open master recipe in the tree view.
None: The activated reference is deactivated.
Tree view
In this area you select the required parameter.
Buttons
OK: Uses the highlighted parameter to display the current value and exits the dialog.
Cancel: Does not apply any selection and exits the dialog.
Help: Opens the online help for this dialog.
Additional information
Overview lists (Page 784)
"Batch" dialog properties
14.1.5.3

"Product" tab (Recipe procedure properties)

Product:
With the button to the right of the input field, you open a dialog in which you can select the
materials to be used as products (BatchCC > materials). The selected product becomes the
main product of the recipe to which the quantity information relates.
Quality:
You can select a quality for a selected product to specify the product more precisely. Only the
qualities assigned to the selected product are displayed.
Product code:
This displays the code of the selected product.
Reference quantity for quantity scaling:
The reference scale is the reference quantity for quantity scaling. All quantity-dependent values
in the recipe relate to this quantity.
The quantity scaling factor results from the ratio: specific quantity to reference scale.
Unit:
Here, you specify the unit of measure for the minimum/maximum and reference scale.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Context help references
14.1 Dialogs
787