Siemens SIMATIC BATCH Operating Manual page 595

Settings in computer management on "PC2"
1. Create two new users in computer management. Example: "brewer1" and "technical1".
2. Create two new groups in computer management. Example: "batchbrewer" and
"batchadmins".
3. Insert user "brewer1" into group "batchbrewer" and user "technical1" into group
"batchadmins".
4. Also add user "technical1" to group "Logon_Administrator". Members of the
Logon_Administrator group have permission to configure SIMATIC Logon and open roles
management in SIMATIC BATCH.
Settings in WinCC Explorer on both PCs
1. Open the User Administrator and select the "SIMATIC Logon" check box. With this setting,
the SIMATIC Logon user data are used for the WinCC Runtime logon. More information
about this is available in WinCC help under Working with WinCC > User administration
structure.
2. In the User Administrator, go to the "Users" menu and create two groups: "batchadmins"
and "batchbrewer". A connection between these two groups is established based on the
matching names of the groups in the WinCC user administration and the Windows user
administration. This means that a user "brewer1" logging on with SIMATIC Logon is granted
the permissions set for WinCC in the User Administrator and for SIMATIC BATCH in
permission management for this user's role. More information on SIMATIC BATCH
permission management and SIMATIC Logon roles management is available in SIMATIC
BATCH help under BATCH Control Center > Defining user permissions and under SIMATIC
Logon > SIMATIC Logon roles management. Assign the appropriate permissions to the
two groups in the User Administrator. To display the BATCH OS controls in process mode,
you require the "Authorization for area" permission.
Settings in SIMATIC Logon on "PC1"
1. In computer management, create a new user (User1, for example) and assign this user to
the "Logon_Administrator" group.
2. Launch SIMATIC Logon by selecting Start > SIMATIC > SIMATIC Logon > Configure
SIMATIC Logon.
3. Logon with the "User1" you just created.
4. On the "Working environment" tab, click the "another computer" option button and enter
the name of your logon computer, in this case "PC2". Save the settings with OK.
You can now delete the "User1" you just created whenever necessary, since the entire logon
procedure now takes place on the "PC2" logon computer. The user "technical1" on "PC2"
ensures that the "Configure SIMATIC Logon" application can be opened on "PC1" and that
settings can be made there.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
11.2 Configuration in the Graphics Designer
BATCH OS controls
595