Columnresizeenabled; Columnfiltervisible; Toolbarorderandvisibility - Siemens SIMATIC BATCH Operating Manual

Column header
Product
Planned quantity
Currently planned quantity
Current quantity
Unit of measure
Batch
Earliest start
Latest finish
The attribute can be dynamized with the ColumnOrderAndVisibility name.
11.5.6.8

ColumnResizeEnabled

Boolean variable.
This attribute specifies whether or not the column width of the table in the control can be
adapted by the operator. If Yes is set, an operator can adapt the column width in process mode.
Default: Yes, the column width can be changed.
The attribute can be dynamized with the ColumnResizeEnabled name.
11.5.6.9

ColumnFilterVisible

Boolean variable.
The attribute specifies whether or not a filter row is displayed for each table column.
Default: Yes.
The attribute can be dynamized with the ColumnFilterVisible name.
11.5.6.10

ToolbarOrderAndVisibility

String.
This attribute specifies the sequence of the symbols in the OS control toolbar. If individual
values are not specified, the corresponding symbols are not displayed in the toolbar.
The values are separated by a semicolon and entered in the following syntax: 1;13;;18;17;...26.
Changing the sequence of the elements would, for example, produce the following values:
2;13;;17;...26. Two consecutive semicolons or the value 0 create a vertical line separator in
the toolbar. This allows you to group the toolbar symbols individually. The settings made here
also influence the shortcut menu.
The table below lists the elements with their symbols and values:
Toolbar elements
Dock/undock.
Undock automatically.
New batches
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Symbol Symbol menu
BATCH OS controls
11.5 Control properties references
Value
4
5
6
7
8
9
10
11
Value
1
22 / -22
2
671