Computers And Units" Tab; Advanced" Tab (Plug-In Details) - Siemens SIMATIC BATCH Operating Manual

Context help references
14.1 Dialogs
14.1.9.26

"Computers and units" tab

All computers
The "All computers" list box displays all configured BATCH clients. You need super user rights
to define user roles for the displayed BATCH clients. Select or clear the check boxes for each
computer to specify the user roles that will be accepted on them. If you click on the "+", you
can open the user roles below a computer and you can close these again by clicking on the
"-".
Units of the process cell
The "Units of the process cell" list box displays all the units of the process cell standardized
for SIMATIC BATCH. By selecting or clearing the check boxes for each unit, you specify the
user roles that will be accepted for the unit. If you click on the "+", you can open the user roles
below a unit and you can close these again by clicking on the "-". This applies only to operator
control of batches.
Note
The settings take effect only for operator control of batches starting from the RUP level (RUP,
ROP, recipe phase). Batches can continue to be operated even if the user is not authorized
for all units.
Status displays
14.1.9.27

"Advanced" tab (plug-in details)

This dialog provides additional information about the module.
The following information is supplied by the module itself:
● Date/time when the module was created.
● Detailed description.
The following information is read from the registry: Installation path.
816
Symbolizes characteristics of the user currently logged on (such as role of the current user).
User roles with yellow frame have super user status.
Caution: The name of this role need not necessarily be "Super user" or something similar.
A member with this role automatically has all rights. The rights of the role super user status
cannot be changed.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA