Siemens SIMATIC BATCH Operating Manual page 908

Context help references
14.1 Dialogs
Properties
Name of the object selected in the process cell tree.
Description
Run time name
CFC chart
"Open" button
Not possible in the multi‐
project.
"Parameters" button
Bloc
Button
Compile
This button only exists for
a project and not for a
multiproject.
Log
Not possible in the multiproject
"Errors" display field
"Warnings" display field
"Display" button
Additional functions
Display of possible additional functions.
"OK" button
Saves your settings and ends the dialog.
"Apply" button
Your settings will be saved without closing the dialog. The button is only available if you have
made changes in the dialog.
908
The description of the interface block is displayed In this text field. Descrip‐
tion texts are entered in the object properties in the SIMATIC Manager.
Corresponds to the WinCC variable name plus the OS name as prefix.
CFC chart name in which the block is located.
Click on the "Open" button to open the appropriate CFC chart and select
the block.
Clicking this button takes you to the corresponding process tag type pa‐
rameter. With the Back button of the process tag type parameter, you return
to this location.
All batch instance blocks of the CFC chart of the selected object are read
in. This also implicitly involves a check for consistency with the batch types
and conformity to ISA-88.
The number of errors for the selected log are displayed.
The number of warnings for the selected log are displayed.
The "Display" button activates the log. The selected log is generated
as an XML file with the specified layout and displayed in the Internet
Explorer.
The "Display" button is always shows all errors/warnings for the selec‐
ted "Process cell". Moreover on a selected object you can right click
to select the "Display Log" dialog to also show object-specific errors
or warnings.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA