Siemens SIMATIC BATCH Operating Manual page 250

BATCH Control Center
9.1 Starting and operating
In the right part of the status bar, the currently logged-on user, the current time and the status
of the BATCH control server or redundant BATCH control server are displayed.
Redundancy status symbols
The connection to the BATCH control servers can assume the following states.
Symbol in the status bar
See also
Objects and object hierarchy (Page 270)
Overview lists (Page 259)
250
Redundant configuration
Both master and standby BATCH
control servers are available.
Redundant servers are available, da‐
ta synchronization between the mas‐
ter and standby server enabled.
Redundant servers are available,
postponed error. Master server wait‐
ing for standby server to take over
role. Standby server cannot take
over.
Redundant servers are available,
postponed error on the master. Mas‐
ter server waiting for standby server
to take over role. Standby server can‐
not take over. Data synchronization
between the master and standby
server enabled.
Warning. The standby server in a re‐
dundant configuration is not availa‐
ble.
Warning. The master server in a re‐
dundant configuration is not availa‐
ble. Master server waiting for standby
server to become available and take
over role.
Warning. The master server in a re‐
dundant configuration is not yet avail‐
able. Master server waiting for stand‐
by server to become available and
take over role. Data synchronization
between the master and standby
server enabled.
Neither of the two redundant BATCH
control servers is available.
The BATCH Control Center is not
ready to use.
Non-redundant configuration
The BATCH control server is
available.
-
-
-
-
-
-
The BATCH Control Server is
not available. The BATCH Con‐
trol Center is not ready to use.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA