Siemens SIMATIC BATCH Operating Manual page 340

BATCH Control Center
9.5 Recipes
The recipe loop was changed. The recipe loop contains two elements in the "Recipe example
- V1.0" recipe and three elements in the "Recipe example - V2.0" recipe.
Property
Recipe example
<Absolute path>
Recipe
Version
Last change
<Additional attributes>
Loop
<Absolute path>
Number of subelements
Elements that were added in the loop
Transition conditions
Condition 3 of a transition has been added.
A 3rd condition has been added to the transition "Trans_4. The name of the transition is located
in the absolute path. The condition itself is represented by the attributes.
The example corresponds to the condition:
U3_String value from RUP_2 unit must not have the value "ERROR"
Property
Recipe_example_1
<Absolute path>
Recipe
Version
Last change
<Additional attributes>
Trans_4
<absolute path>
Number of conditions
Logic
Condition_12
<Absolute path>
Description
Operator
Right value
Left value
Effective immediately (left)
340
Value (left side)
Recipe example
V1.0
08.06.2015 14:36:58 (UTC
+2:00)
...
2
Value (left side)
Recipe example
V1.0
08.06.2015 14:36:58 (UTC
+2:00)
...
2
(C1 OR C2)
Value (right side)
Recipe example
V2.0
01.06.2015 11:06:05
(UTC +2:00)
...
3
Value (right side)
Recipe example
V2.0
01.06.2015 11:06:05
(UTC +2:00)
...
3
(C1 OR C2 OR C3)
<>
ERROR
U3_String (RUP_2:Uni‐
tParameter)
Yes
Operating Manual, 02/2016, A5E35958174-AA
Recipe
Loop
Recipe
Transition
Condition
SIMATIC BATCH V8.2