Control: Simatic Batch Os Allocation - Siemens SIMATIC BATCH Operating Manual

3. Use the command "New batch(es)" from the shortcut menu to create new batches. To do
so, select an order folder in the navigation area or an existing batch in the display area in
the "Entire list" or "Planning list" tab and select "New batch(es)" in the shortcut menu. The
data of the selected object serves as the template and is imported into the SIMATIC BATCH
OS Creation Control for generating new batches. Only there can you then create new
batches by using the command "Generate batch(es) and entering the desired quantity. The
new batches are then created in the Entire list or Planning list.
4. Display a released batch in the "SIMATIC BATCH OS Properties" control in order to monitor
it. Double-click on the corresponding batch in one of two lists mentioned above. The control
recipe of the batch is then displayed in the SIMATIC BATCH OS Properties Control. The
batch execution can be operated and monitored in detail in this control.
5. Start a released batch in the Entire list or Planning list. Select the required batch and select
the "Start batch" command in the shortcut menu.
You have now used the most important commands and procedures in this control.
11.3.3

Control: SIMATIC BATCH OS Allocation

What is the purpose of the "SIMATIC BATCH OS Allocation"?
This control provides an overview of your units defined within your Batch process cells. In
addition to the visualization of the units and their allocation, the process conditions for the
batch runtime can also be shown in the shortcut menu and/or toolbar.
Control properties
The control can be configured with the properties (attributes) so that just one unit or individual
units belonging to a specific naming scheme are displayed. You can change properties of the
control in process mode using a script or assign it permanently in the WinCC Graphics
Designer.
The control recipe of the corresponding batch is displayed in the SIMATIC BATCH OS
Properties Control by using the "Display control recipe" command in the shortcut menu of the
selected object.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
BATCH OS controls
11.3 Operations in process mode
605