Siemens SIMATIC BATCH Operating Manual page 960

Context help references
14.1 Dialogs
Specifically the batch objects are:
● Batch types → currently selected object
– Data types
– Units of measure
– Operation types, phase types, and process tag types
– Equipment properties
● Batch instances:
– Process cell (folder)
– Units (folder)
– Equipment properties
– Equipment modules (EMOD) (folder)
– Neutral folder
– Equipment phases (EPH)
– Parameters of equipment phases
– Equipment operations (EOP)
– Parameters of equipment operations
– Process tags
– Process tag parameters
Runtime name in the dialog header
Display of the runtime name.
Process cell data
For navigation in the process cell data.
960
The system specifies standard data types Output material, Boolean, Input material,
Floating-point number, Integer, and String. By selecting the "Data types" folder, you can
create your own data types. After selection of your own data type, you can change its
properties.
By selecting the "Units of measure" folder, you can create new physical units of measure;
by selecting a created unit of measure, you can change its properties.
By selecting the appropriate folder, you can create new operation types, phase types,
and process tag types. By selecting a created object, you can change its properties.
The order of type parameters can be changed in the process cell tree via drag & drop.
When SFC types of the EOP/EPH category are used, the batch types are only read and
displayed in this dialog box (read only). Any modifications must be made in the SFC
chart.
By selecting the "Equipment properties" folder, you can create new equipment
properties; by selecting a created equipment property, you can change its properties.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA