Siemens SIMATIC BATCH Operating Manual page 1134

Glossary
Operator
see Operator.
The operator is the user of this software coordinates the batch during runtime.
Operator dialog
Input and display option for an operator instruction:
● Without acknowledgment
Example: Entry of analysis process values.
● With acknowledgment
Example "manual dosing": The operator is instructed which material and how much to add.
The operator then enters the actual values that have been added and confirms the input
(acknowledgment).
Operator instruction
The operator instruction allows instructions to be displayed to the operator during execution
of a recipe. A distinction is made between the display of pure instructions (NOP step) and an
instruction that allows operator input (operator dialog). The operator may also be required to
acknowledge the instruction.
Operator station
OCM: (operator control and monitoring) station
Abbreviation: OS, PCS 7 OS
OSC (online structure changes)
Changes to recipe structures in planned, released and started batches are known as online
structure changes. With online structure changes, you are able to refine your master recipes
in test mode and adjust them perfectly to your processes.
Output material
The name and amount of material or energy expected as the result of executing a recipe.
A material (product, by-product, or waste product) expected as the result of executing a recipe.
Output material
The name and amount of material or energy expected as the result of executing a recipe.
A material (product, by-product, or waste product) expected as the result of executing a recipe.
1134
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA