Toolbarvisible - Siemens SIMATIC BATCH Operating Manual

BATCH OS controls
11.5 Control properties references
Toolbar elements
Properties
Delete batch
Release batch
Cancel batch
Lock batch
Unlock
Start batch
Pause batch after step
Hold batch immediately
Resume batch
Stop batch
Abort batch
Abort batch (emergency)
Close batch
Archive batch
Display control recipe
Enter comment
Update
Open with BCC
Change
Use a negative or a positive value to specify whether or not the function "Undock automatically"
should be used by default. Example: If you enter the value -22 instead of the specified value
22 for the attribute for the "Undock automatically" function, the button is displayed in the OS
control as pressed, that is, the OS Control is automatically shown as undocked.
Default: 1;22;;24;25;23;26;;2;3;4;;5;6;7;8;;9;10;11;12;13;14;15;;16;17;19;;18;20;;21
The attribute can be dynamized with the ToolbarOrderAndVisibility name.
11.5.6.11

ToolbarVisible

Boolean variable.
This attribute specifies whether or not the toolbar is displayed in the control.
Default: Yes, the toolbar is used or displayed.
The attribute can be dynamized with the ToolbarVisible name.
672
Symbol Symbol menu
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Value
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
24
25
23
26