Siemens SIMATIC BATCH Operating Manual page 410

BATCH Control Center
9.8 Batch control
Example
Adapting PCS 7 OS (WinCC) so that BatchCC opens with the current unit recipe
Using WinCC scripts, you can have the current unit recipe displayed in the application window
each time BatchCC is called. The current unit recipe is taken from the current operator picture
(unit) on the OS client.
Automatically opening a control recipe in BatchCC
The command line can be used to pass BatchCC a parameter specifying the control recipe to
be opened.
The parameter or opening the control recipe is: /B="
410
X ;0", X specifies the batch ID.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA