Process Tags" Tab (Rp, Rup, Rop Properties); Parameters" Tab (Procedure/Step/Formula/Batch Properties) - Siemens SIMATIC BATCH Operating Manual

Context help references
14.1 Dialogs
Edit (in the recipe procedure dialogs):
A dialog opens for the selected line:
● If the "Condition" option was active, two tabs will be displayed. Edit the condition for the
unit in the first tab, "Condition". In the second tab "Allocation" you will see the preview:
– Left: All units that fulfill the given conditions are displayed as selected under "Equipment
– Right: The union set of the phases of all selected units is displayed under "Available
● If the "Condition" option was not active, only the "Allocation" tab for unit selection is
displayed.
New (in the recipe procedure dialogs):
Creates a new reference to unit recipes.
Delete (in the recipe procedure dialogs):
Deletes the selected row if the corresponding unit recipe was also deleted in the graphic user
interface.
14.1.3.9

"Process tags" tab (RP, RUP, ROP properties)

For the recipe procedure (RP), recipe unit procedure (RUP), and sequence in a recipe
operation (ROP sequence) recipe objects, or in the header data of the library operation, you
can select data that will be stored in the archive of SIMATIC BATCH as trend data.
Unit
In the Unit window, you can select the measured variables to be archived in the tree structure
using the unit and the equipment phase. All measured variables are offered here, which were
assigned a WinCC process tag variable during the configuration in ES (see also section
Configuring use of archive data from WinCC archives (Page 172)). Use the arrow key to add
a selected measured variable to the list of process tags to be recorded (archive value list).
As measured values, the process values of the parameter blocks (EPAR_) linked via the EOP,
EPH and TAG_COLL blocks are available.
The measured variables are detected during the execution of the object at which they are
entered in the archive value list. This means that values that have to be recorded during the
entire batch are entered in the archive value list of the recipe unit procedure. Values that only
need to be acquired during a recipe operation are entered in the ROP properties in the archive
value list.
14.1.3.10

"Parameters" tab (Procedure/Step/Formula/Batch properties)

The parameters are listed in the properties of the recipe header (recipe procedure), unit
recipes, steps, formula category, formula, and batch.
772
selection".
phases".
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA