Siemens SIMATIC BATCH Operating Manual page 729

Validation plausibility check
If the value of the property is set to "Yes", the system initiates a validation plausibility check.
There validation checks to determine whether or not unit-type process parameters have been
selected. If units are not selected at the time of the validation, an error is signaled. If validation
plausibility check is not used, only a warning is signaled and the validation is completed
successfully.
The default setting of this property is "Yes".
Unit selection according to conditions
The unit selection is made according to conditions for all unit assignments from the point in
time when this property is activated. As a result, the "Conditions" option is activated on the
"Allocations" tab of the properties dialogs of the recipe header. This option limits the usable
units. This means that the only equipment phases and operations offered for recipe steps are
those that are available in the limited set of units.
The default setting of this property is "No".
Allow importing of materials
If you set the value of this property to "Yes", then during import of recipes, associated materials
that are not yet contained in BatchCC are imported.
The default setting of this property is "No".
Display indexes
During the creation of recipes (flat, hierarchical) in the Recipe Editor, indexes are assigned
automatically and displayed on the lower right when recipe elements are inserted. Indexes are
visible during master recipe creation in the Recipe Editor and in batches in the control recipe
view in BatchCC and OS control "Properties". Once made, a setting can be changed at any
time. A setting made is immediately implemented in the respective views and indexes are
displayed accordingly.
Note
Comparing recipes
The comparison of master recipes is based on unique indexes for individual recipe elements.
Therefore, you should use the "Unique" value for the project setting "Display indexes" in the
"General" tab.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Context help references
14.1 Dialogs
729