Setting Recipe Properties; Passing Formula Parameters In The Recipe - Siemens SIMATIC BATCH Operating Manual

BATCH Recipe Editor
10.4 Creating recipes
Procedure
1. Create a new library operation / library substructure in the Batch Control Center.
2. Open the "Properties" dialog of the library operation or library substructure and open the
"Allocations" tab.
3. Click on the "Edit" button and open the "Candidates" tab.
4. Activate only the desired unit class and close all dialogs.
Result
The selection for library references in a recipe is limited to the unit class by the filter criterion.
10.4.6

Setting recipe properties

10.4.6.1

Passing formula parameters in the recipe

Forwarding the formula parameters in the recipe
The same formula parameter can be used more than once in different recipe steps of various
types. A formula parameter can also be used at the same time in transition conditions.
The schematic below shows the possible use of a formula parameter.
560
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA