Display Of Transfer Parameters; Assigning Materials - Siemens SIMATIC BATCH Operating Manual

BATCH OS controls
11.4 Applications in process mode
Additional information
Find recipe elements (Page 1108)
11.4.10

Display of transfer parameters

Display of transfer parameters
Interconnected transfer parameters (Via, Source, Destination) are displayed and edited on the
"Parameters" tab in the OS Properties Control.
Transfer parameter
symbol
For each transfer parameter row listed, you can call up a drop down list box in the "Location"
column and select and assign a transfer location. To do this, the batch must not have been
started and the recipe step concerned must not be in progress.
When a recipe procedure element is running, changes to transfer parameters are only applied
in the AS if you use the "Effective immediately" option in the recipe's parameter properties.
Click the "Apply" button to save your changes for Route Control.
11.4.11

Assigning materials

Input material and output material
Materials created in the BCC can be used as input material, as output material, and as input
and output material. You can change the purpose assigned to a material if the batch has not
yet been started or if the batch is not yet processing the recipe step concerned.
In the BATCH OS Properties control, select the batch/RUP/RPH concerned and click the
"Parameters" tab. In the "Materials" column, you can overwrite or change the preselected
material usage by selecting the usages listed in the drop down list for each specified parameter
line. Please take into consideration that the option "effective immediately" was activated in the
used master recipe in the recipe editor for the parameter import into the AS.
634
Meaning
Via transfer parameter
Source transfer parameter
Source Destination transfer parameter
Source Destination Via transfer parameter
Source Via transfer parameter
Destination Via transfer parameter
Destination transfer parameter
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA