Siemens SIMATIC BATCH Operating Manual page 952

Context help references
14.1 Dialogs
Layout of the tab
The meaning of the column headers, the information contained in the table, and the functions
that can be used (buttons and check boxes) are described below.
Name
Name of the connection table from the basic engineering. A connection table is opened in
NetPro.
"Compile" check box
If you select the check box in the "Compile" column header or below the individual object and
then click the "Start" button, the network data from the connection table is saved and compiled
in NetPro.
The symbols for the "Compile" and "Download" functions are as follows:
Symbol
Operating mode
The operating mode of the AS is read out. If the AS cannot be reached, this status is displayed.
"Download" check box
If you select the check box in the "Download" column header or below the individual object
and then click the "Start" button, the data from the connection table is downloaded to the target
stations.
"Log" button
Each object listed in the table represents a row. For each object row, there is a button in the
"Log" column. If you click the button, the result of compiling and downloading the connections
will be displayed.
Project path
The "Project path" column displays the project path to your S7 program in the SIMATIC
Manager. There you will find all the data blocks that will be downloaded to the AS.
952
Meaning
The object must be compiled/downloaded
The object was not compiled/downloaded. Check the log for the action. Click the button in
the "Log" column and repeat the action.
The object was successfully compiled/downloaded, however with warnings. Click the "Log"
button to view the warnings.
The object was successfully compiled/downloaded.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA