Siemens SIMATIC BATCH Operating Manual page 629

"Scheduling" shortcut menu
The "Scheduling" command is only available in the shortcut menu if you select two batches.
Shortcut
menu com‐
mand
Scheduling
When you select a chained batch and open the "Scheduling" shortcut menu, the following
editing commands are available to you.
Shortcut menu command
Go to predecessor
Go to successor
Unchain
Clear chaining to predecessor
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Cascading Cascading
menu 1 menu 2
Chain →
←
Chain all
Meaning
This shortcut menu command is only enabled if there is a
predecessor batch.
Selects the predecessor batch in the chain from the corre‐
sponding list.
This shortcut menu command is only enabled if there is a
predecessor batch. Selects the successor batch in the chain
from the corresponding list.
Cancels the chaining to the successor batch for two selected
and chained batches.
Clears the chaining to the predecessor batch. The following
menu shows which batch is the predecessor batch. This
command is only enabled if there is a predecessor batch.
11.4 Applications in process mode
Meaning
Chains the selected batches whereby the arrow
points to the successor.
Chains all the selected batches to each other.
BATCH OS controls
629