Toolbarvisible; Recipeorformulalistcolumnwidth - Siemens SIMATIC BATCH Operating Manual

BATCH OS controls
11.5 Control properties references
the toolbar symbols individually. The settings made here also influence the shortcut menu.
The table below lists the elements with their symbols and values:
Toolbar elements
Dock/undock
Undock automatically
Change
Use a negative or a positive value to specify whether or not the function "Undock automatically"
should be used by default. Example: If you enter the value -2 instead of the specified value 2
for the attribute for the "Undock automatically" function, the button is displayed in the OS control
as pressed, that is, the OS Control is automatically shown as undocked.
Default: 1;2;;3;4;5;6.
The attribute can be dynamized with the ToolbarOrderAndVisibility name.
11.5.4.36

ToolbarVisible

Boolean variable.
This attribute specifies whether or not the toolbar is displayed in the control.
Default: Yes.
The attribute can be dynamized with the ToolbarVisible name.
11.5.4.37

RecipeOrFormulaListColumnWidth

String.
This attribute defines the width of the individual table columns in the dialog for selecting recipes/
formulas. The default values for column width are as follows:
Table column
Recipe
Formula
Formula category
Product
No function. However, the value should not be deleted.
Class
Group
The values are entered, separated by a semicolon.
The attribute can be dynamized with the RecipeOrFormulaListColumnWidth name
664
Symbol Symbol menu
Column width in pixels
175
160
200
75
75
75
75
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Value
1
2 /-2
3
4
5
6