Siemens SIMATIC BATCH Operating Manual page 604

BATCH OS controls
11.3 Operations in process mode
Icon Command
Hold batch immediately
Resume batch
Stop batch
Abort batch
Abort batch (emergency)
Close batch
Archive batch
Display control recipe
Brief info
Enter comment
Update
Favorites > Add batch to
favorites
Open with BatchCC
Toolbar with operator functions
The tools on the toolbar are also context-sensitive. The only tools enabled there are those that
can actually be used in a specific situation.
Operation of the control in process mode
The requirements for operation in process mode:
● The BATCH control has been inserted in a process picture and appropriately configured.
● WinCC Runtime has been started and the process picture with the BATCH controls is
displayed.
● A BATCH project has been connected via the master.
● SIMATIC BATCH has been started on the PC from which the BATCH project originates.
Several process operations in the control are listed below:
1. Update your project data with the function provided for this in the toolbar.
2. Use the ""New order category" and "New order" commands to create a new order category
and a new order. To do this, select the "Batch process cell" folder and then the "Order
category" in the navigation area and select the corresponding command for each shortcut
menu respectively.
604
Meaning
Holds the selected and running batch immediately following your confirmation.
Resumes a batch that has been paused.
Stops the selected and running batch following your confirmation.
Aborts the selected and running batch following your confirmation.
Aborts the selected and running batch following your confirmation.
Closes all finished, stopped or aborted batches. This is necessary before you can
use the "Archive" command.
Starts the archiving for the closed batch once you have exited the confirmation
dialog by pressing "Yes". Requirement: You have configured an accessible con‐
nection to the archive location in the "Archive" tab of the project settings.
Displays the control recipe for the selected batch in the "SIMATIC BATCH OS
Properties" Control.
Opens a window in which the information for the selected object is displayed.
Opens the "Comment" tab in the "Batch properties" dialog for the selected object.
You can enter a comment for the batch there.
Updates the batch process cell data in the entire control.
Adds the selected batches to the "Favorites" tab.
If you select a batch, regardless of the tab it is in, it is displayed in the BatchCC.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA