Siemens SIMATIC BATCH Operating Manual page 692

Recommended procedure
12.8 How do I configure and use dynamic unit parameters?
Engineering in the BATCH configuration dialog
1. To make the new configuration data available in SIMATIC BATCH, you have to generate/
propagate the batch types and compile/merge the batch instances. To do so, open the
BATCH configuration dialog in SIMATIC Manager and start these actions.
2. If necessary, transfer the BATCH messages to the PCS 7 OS, and then download your
Batch process cell.
PCS 7 OS
1. Compile and download your PCS 7 OS.
2. Start process operation on the PCS 7 OS.
Engineering in BatchCC and in the Recipe Editor
1. If BATCH Runtime has not been started in the BATCH launch coordinator, start it with the
corresponding command from the shortcut menu of the BATCH launch coordinator.
2. Open BatchCC and update your batch process cell. Only then can the new engineering
data be used in SIMATIC BATCH.
3. Open a master recipe in which you want to configure a new parameter step.
4. Insert a recipe function or a recipe operation which includes the recipe function in the
corresponding unit procedure.
5. Open the object properties of the recipe function and select "Unit" under function in the
"General" tab. In the "Parameter" tab, select the value that the function is to include during
batch execution, here "dirty".
6. Save the recipe.
692
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA