Wincc Archive Variable; Display" Additional Function; Control Strategies Of - Siemens SIMATIC BATCH Operating Manual

Context help references
14.1 Dialogs
14.1.11.28

WinCC archive variable

Dialog box
This dialog box is a browser that displays all operator stations and their WinCC archives of a
single project or all operator stations of all projects in any project of a multiproject. By browsing
through the WinCC archives, you can select the WinCC process tag and by clicking the "Apply"
button, you assign the instance parameter.
Note
If there is an OS with the name "wincc" in the project, none of the existing WinCC Tag Logging
archives are displayed in this dialog box. Therefore, avoid using the name "wincc" in Batch
projects.
The measured variable at the parameter instance in a multiproject is read-only.
Apply
The variable is accepted when it is applied and the connection between the instance parameter
of the unit and the selected measured variable is established.
14.1.11.29

"Display" additional function

Dialog box
This dialog box displays all objects that use the previously selected Batch type. These can be
instances, instance parameters, units or equipment properties.
Using a filter, you can display either all attributes of a particular object or only specific attributes.
Further functions include:
● Opening a CFC chart
● Editing a control strategy parameter
● Assigning a WinCC archive tag
14.1.11.30

Control strategies of ....

Function
The appropriate parameters are assigned to a mode of operation in this dialog box. This means
that later in the batch control only the parameters selected here will be considered for an
appropriately set mode of operation. If the modes of operation are restricted to the instance
(EPH or EOP) allocated to the phase type or operation type, then later in the recipe also only
the modes of operation released here will be used.
854
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA