Siemens SIMATIC BATCH Operating Manual page 331

Changes:
1. The name of the "ROP" has been changed to "Recipe operation".
2. The "Heat_1" recipe step has been deleted.
3. The "Trans_2" transition has been deleted.
4. The "Agitate_4" recipe step has been added.
5. The "Trans_5" transition has been added.
Conditions for comparison of the two master recipes V1.0 and V2.0
● For the following comparison result, master recipe V1.0 was selected first and then master
recipe V2.0. For this reason, the values of recipe V1.0 are located in the left column of the
result and the values of recipe V2.0 are located in the right column.
● Only data needed to explain the principle, and not the entire data, is shown.
● In addition, the result elements are shown in expanded state, like in the printout.
Result of the comparison, display and interpretation
The individual attributes are shown in the following result blocks. The display is influenced by
your filter selection from the toolbar. The result window contains:
● All elements in the right and left columns that have not changed and/or
● All elements in the right and left columns that have changed and/or
● The elements in the right column that are only present in the comparison object of the right
column
● The elements in the left column that are only present in the comparison object of the left
column
Property
Recipe_example_1
<absolute path>
Name
Version
Last change
<Additional attributes>
RUP_1
<Absolute path>
Name
<Additional attributes>
Recipe_operation_2
<Absolute path>
Name
<Additional attributes>
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Value (left side)
Recipe example
V1.0
08.06.2015 14:36:58
(UTC +2:00)
...
RUP
...
ROP
...
Value (right side)
Recipe example
V2.0
01.06.2015 11:06:05 (UTC
+2:00)
...
RUP
...
Recipe operation
...
BATCH Control Center
9.5 Recipes
Recipe
Recipe unit procedure
Recipe operation
331