Siemens SIMATIC BATCH Operating Manual page 528

BATCH Recipe Editor
10.4 Creating recipes
Procedure at the recipe unit procedure level
1. Open the recipe.
2. With a hierarchical recipe: select the RUP (column is shown with a light blue background).
3. Select the "Properties" command in the shortcut menu (select with right mouse button).
4. Change to the "Condition" tab.
5. Click the "New" button.
Result: A new row is created in the table for entry of another condition.
6. Click the "Change" button.
Result: The "Operand 1" dialog box opens.
7. From the list, select that attribute of the unit that that needs to satisfy a condition.
8. Click the "Next" button.
Result: The "Operator" dialog box is displayed.
9. In the middle field select the operator that specifies the logic operation condition of the two
operands and therefore defines the condition.
10.Click the "Next" button.
Result: The "Operand 2" dialog box opens.
11.From the list, select the value of the unit attribute needed to meet the required condition.
Some values may have to be edited in a subsequent dialog. Use the context-sensitive online
help if you want more information in this regard ("Help" button).
12.Click the "Next" button.
Result: The "Operator" dialog box opens again. All elements of the condition are displayed
and cannot be changed.
13.Select the "Finish" button.
Result: The complete condition is entered in the "Condition" tab. Enter additional conditions
as needed in the same way.
14.Confirm with "OK".
Result: The following is displayed in the "Allocation" tab:
– Left: All units are displayed as unchangeable under "Equipment selection". The units
– Right: The union set of all selected units is displayed under "Available phases".
15.First select the view of the tree structure:
– Class view: All unit classes without an area structure are listed in the "Unit selection"
– Process cell complex view: All areas with the units they contain are listed in the "Unit
16.Select the required allocation strategy and exit the dialog using the "OK" button.
528
that it should be are already selected automatically.
field.
selection" field.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA