Columnorderandvisibility; Columnresizeenabled; Columnfiltervisible - Siemens SIMATIC BATCH Operating Manual

BATCH OS controls
11.5 Control properties references
Table column
ROP runtime
Formula
The values are entered, separated by a semicolon. The attribute can be dynamized with the
ColumnWidth name.
11.5.2.4

ColumnOrderAndVisibility

String.
Specifies the sequence of the table headers in the control. The values in the following table
define the table column.
Column name
Unit
Batch
Batch runtime
Order category
Order
Master recipe
RUP (recipe unit procedure)
RUP runtime
ROP (recipe operation)
ROP runtime
Formula
The values are separated by a semicolon and entered in the following syntax:
1;2;3;4;5;6;7;8;9;10;11. By changing the number sequence, you make a corresponding change
to the column name sequence.
The attribute can be dynamized with the ColumnOrderAndVisibility name.
11.5.2.5

ColumnResizeEnabled

Boolean variable.
This attribute specifies whether or not the column width of the table in the control can be
adapted by the operator. If Yes is set, an operator can adapt the column width in process mode.
Default: Yes, the column width can be changed.
The attribute can be dynamized with the ColumnResizeEnabled name.
11.5.2.6

ColumnFilterVisible

Boolean variable.
The attribute specifies whether or not a filter row is displayed for each table column.
Default: Yes.
648
Column width in pixels
50
100
Value
1
2
3
4
5
6
7
8
9
10
11
Operating Manual, 02/2016, A5E35958174-AA
SIMATIC BATCH V8.2