Additional Status Identifier - Siemens SIMATIC BATCH Operating Manual

BATCH Control Center
9.8 Batch control
Display of the allocation status – flat recipe
Display
Additional information
BATCH configuration dialog > "Chart folder" tab (Page 949)
9.8.5.14

Additional status identifier

Additional status IDs - breakpoint and command
The breakpoint is indicated by a red circle. The circle is replaced by the breakpoint operator
button when the step is activated. The symbol for the breakpoint operator button corresponds
to the start icon on the toolbar.
The pending command is indicated by a symbol corresponding to the operator button.
434
Name
Waiting for unit
Unit allocated
Unit allocated and waiting
of equipment phase
Unit and equipment phase
allocated
Allocation error
Missing AS-OS connec‐
tion
Meaning
The control wants to allocate the unit required
by the RPH
Either allocated by another RPH, or there are
not enough memory blocks.
The control has allocated the unit required by
the RPH
The control wants to allocate the equipment
phase required by the RPH
The control has allocated the RPH
Allocation error or connection failure
OS has no connection to the AS
Operating Manual, 02/2016, A5E35958174-AA
SIMATIC BATCH V8.2