Process Tag Type Parameter" Selection For The Trans Block - Siemens SIMATIC BATCH Operating Manual

Context help references
14.1 Dialogs
Log
"Errors" display field
"Warnings" display field
"Display" button
Additional functions
Instances: Display
All the instance parameters that refer to this process tag type parameter are listed in a dialog.
OK button
Saves your settings and closes the dialog.
Apply button
Your settings are saved without closing the dialog. The button is only available if you have
made changes in the dialog.
Cancel button
Closes the dialog without saving changes.
Help button
Opens the SIMATIC BATCH online help for this context.
14.1.12.28

"Process tag type parameter" selection for the TRANS block

Process tag type parameters selection
In the list "Process cell data" you have selected the object "process tag type parameters".
Run time name in the dialog header
Display of the run time name.
900
The number of errors for the selected log is displayed.
The number of warnings for the selected log is displayed.
The logging is activated with the "Display" button. The selected log is
generated as an XML file in the specified layout and displayed in In‐
ternet Explorer.
Select "Process cell" and click the "Display" button to show all process
cell errors or warnings. You can also right-click a selected object and
select the "Display log" function to display object-specific errors or
warnings.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA