Siemens SIMATIC BATCH Operating Manual page 608

BATCH OS controls
11.3 Operations in process mode
Symbol
608
Shortcut menu Symbol
command
Batch
Subcommand Meaning
New batch(es) Creates new batches in the display
area of the OS Control Creation based
on a selected batch. In the case of
multiple selection, the data from the
batch that was first selected is always
used as the template data.
Properties Opens the "Batch properties" dialog.
The dialog provides batch information
and settings on the following tabs:
● Order category
● Order
● Batch
● Parameter
● Allocation: Unit and strategy
● Comments
● Chaining
Delete batch Deletes the batch. All list entries of this
batch are thereby removed in this con‐
trol.
Close batch Closes finished, aborted or canceled
batches.
Hold batch after active Holds the selected and running batch
step after the current step, if you have con‐
firmed the command.
Hold batch immediate‐ Holds the selected and running batch
ly immediately following your confirma‐
tion.
Stop batch Stops the selected and running batch
following your confirmation.
Abort batch Aborts the selected and running batch
following your confirmation.
Abort batch (emergen‐ Aborts the selected and running batch
cy) following your confirmation.
Add batch to favorites Adds the batch as a favorite to the
"Favorites" tab in the OS control prop‐
erties.
Remove batch from fa‐ Removes the batch from the favorites
vorites in the "Favorites" tab in the OS control
properties.
Operating Manual, 02/2016, A5E35958174-AA
selection
SIMATIC BATCH V8.2